Meng Tai Eyewear/Materials

Materials

What we run
every day.

Not a list of everything that could be molded — the grades that are already set up, already dried correctly and already understood on our presses.

Rigid grades

Anyone sourcing eyewear knows what these are, so the note against each one is about when it gets chosen rather than what it stands for.

Polycarbonate and nylons

  • PC — safety and sports fronts, and anywhere impact matters more than weight
  • TR90 — the default for light, flexible frames
  • TR90 NZZ — the natural, unpigmented grade; it cools translucent rather than clear, and is the base for colors mixed to a customer's own reference
  • PA66 — stiffer, for parts that must hold their shape
  • PA12 — tough and dimensionally stable, and the grade with a bio-based equivalent

Soft grades

  • TPR — temple tips, nose pads, grips
  • TPEE — where the soft part also has to take load

Soft materials are molded onto the hard frame rather than glued to it, whether or not it has been painted first. See over-molding.

Sustainable options

Recycled and bio-based grades.

These are not a pilot. They are the grades we are already experienced with, and they run on the same presses as everything else.

Recycled PC Post-consumer polycarbonate (PCR PC)
Recycled TPR Temple tips, nose pads, grips
Bio-based PA12 Arkema Rilsan® Clear G850 Rnew® · EMS Grilamid TR GreenLine
Recycled packaging Pouches, EVA cases

What switching actually involves

Shrinkage and flow are not identical between a virgin grade and its recycled or bio-based equivalent. A tool cut for one may need adjusting for the other, and sometimes a part has to be redesigned slightly. There is no honest way to promise in advance that a switch is free — what we can say is that we have run these grades before and will tell you what your specific tool needs when we have seen it.

GRS

We are not GRS (Global Recycled Standard) certified. Certification is a chain-of-custody audit of the factory, not a document that can be produced for a single order, and it is a cost that only makes sense against a program big enough to carry it.

If GRS-certified recycled content is a condition of yours, raise it at enquiry stage with the volume attached and we will look at certifying for it. Running the recycled grades themselves needs no certificate and we do that today.

Color

Color can come from the material or from the paint line, and the choice changes what else is possible. A pigmented resin carries its color all the way through, which survives a scratch. A painted frame can carry finishes a resin cannot — gradients, pattern transfer, metallics — and because we paint before the soft shot, a painted frame can still take an over-molded grip.

TR90 NZZ is the unpigmented grade, and it is where a color mixed to a customer's own reference starts rather than one picked off a supplier's chart. It is not a clear material: it leaves the mold translucent and slightly hazy. If a genuinely transparent frame is what you are after, say so at quotation stage — that is a different material question and not one to discover at sampling.

If the grade you need is not listed

Tell us which one and what it has to do. Running an unfamiliar grade is a drying, processing and sampling question, not a refusal — but it is a real question, and it belongs in the quotation rather than being waved through.

Tell us the material.

Or tell us what the part has to survive, and we will tell you which grades are worth considering.

Request a quotation